URD Off Road Y Pipe 2003-2009 4Runner V6

URD “Off-Road” Y Pipe for 2003-2009 4Runner

Fits 2003-2009 4Runners with V6 engine

The stock Y pipe has flow impediments. It has many bends and pinches down to some very small cross-sections.  It has a much smaller inner diameter than it looks, The pipe is doubled walled and the inner pipe is very narrow and even more so at the pinch down where it passes under the transfer case.

The lowest part of the truck is where the Y pipe passes under the transfer case and is very prone to getting caught on rocks and stumps when off roading and can get smashed down so much it can prevent the engine from running.

URD was the first to develop the aftermarket Y pipe for the 4Runner and we first did it to solve the off road clearance problem and but quickly realized there is also a nice performance benefit as well.

The flanges have recesses machined into them that are the perfect depth for the gaskets.  The stock Toyota gaskets are crushing O-Ring type gaskets.  When the bolts are tightened down all the way so the flanges come together, the gasket crushes just enough for a perfect seal.  With the flanges firmly flat against each other they don’t move, and they don’t bend causing leaks like some aftermarket exhaust systems and headers do.

The piping is 2.25” high quality, heavy gauge 304 stainless that is extremely durable and all hand TIG welded. This Y pipe will outlast the vehicle.

The URD Competition Y Pipe was designed for off road use and competition events.

The URD Competition Y Pipe has ports for the stock rear O2 sensors and has an extra port for an aftermarket wideband O2 sensor for your AFR gauge.

Tests of the Off-Road Y Pipe showed how well it freed up the exhaust system on both stock engines, and engines with a supercharger.

Note- Not compatible with sub-frame type lifts that lower the front differential.  The change in the angle of the front propeller shaft causes and interference problem.