URD Throttle Body Adapter, 70 to 76mm 2016+ Tacoma with 3.5L V6

This CNC billet machined adapter plate will allow you to install a larger throttle valve on your 2016 and later Tacoma with the 3.5L V6 engine.

It fits the 2016 and later Tacoma with the 3.5L V6 engine and allows you to move from the stock 70mm throttle and upgrade it to the 76mm throttle valve found on the later dual VVTi engines found in the 2005+ 2UZ-FE 4.7L V8 and 2007+ 3UR-FE 5.7L V8.  Throttle valve from a 2006 Sequoia does not fit.

This adapter is used to install the much larger (76mm) throttle valve from the larger Toyota engines to your truck\’s engine

It is a simple bolt on and plu gin installation. All you need to do is put a thin layer of RTV silicone on the back side of the new throttle valve and adapt it to your existing intake system.

Note-May fit other Toyota vehicles with 3.5L engine.  Other applications have not been tested.

Installation Note:
Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).  The stock air filter box may not be able to fit the larger diameter of the 76mm throttle valve.  Aftermarket intakes my require a larger silicone boot to fit, 3-3.25″.