These are the fuel injectors we are currently using in our fuel upgrade kit for the 5VZ-FE 3.4L engine. They are packaged in sets of 6. The stock injectors on the 5VZ-Fe 3.4L V6 are 240cc and these are 310cc and are perfect for the TRD/Magnuson supercharger kits. To use these you will need some way of tuning for them, like our URD MAF/Timing Calibrator or the MapECU3.
You will also need these injector harness adapters to plug them into the stock wire harness
Flow Rate – cc
310 cc / min @ 43.5 PSI
Flow Rate – lb
30 lb / hr @ 43.5 PSI
Resistance
12.5 Ohms @ 68 F
Voltage
8-15 Volts, nominal 13.5 Volts
Amperage
1.0 Amps
Pressure
Min 30 PSIG / Max 100 PSIG
Note- To get a nice snug fit in the manifold injector ports you may need to slightly shorten the plastic fuel rail spacers.
Reviews
There are no reviews yet.