Cart $0.00
0
0
Subtotal: $0.00
No products in the cart.

URD Fuel/Pump Filter Kit ALL ENGINES 2005-2006 Tundra

If you have converted your 2005-2006 Tundra engine to any type of forced induction system, URD strongly recommends installing the URD fuel pump/filter upgrade kit.

Includes

  • Detailed URD installation instructions
  • High flow Walbro 255 LPH fuel pump and appropriate accessories or the pump of your choice
  • External high capacity fuel filter (quick change)
  • Special in-tank, high-pressure fuel submersible hose that is fully multi-fuel compatible that is specified to be immersed in fuel (SAE J30R10 100 PSI).
  • External high-pressure fuel line that is CARB approved (CARB Q-09-019A Multi and Bio Fuel compatible 225 PSI)
  • All needed hardware

$185.00

Select Your Fuel Pump *

This fuel pump/filter upgrade kit is for the 2005-2006 Tundra ALL ENGINES.

The heart of the fuel system is the fuel pump. It must deliver the volume of fuel needed at the required pressure for the rest of the fuel system to do its job. If the pump can’t provide more flow, don’t expect to have the fuel needed for more power.

UNDERDOG RACING DEVELOPMENT has been making and tuning forced induction systems for the Toyota 4.0L 1GR-FE engine since 2005. One thing we observe time and time again is as the power levels go up, the fuel pressure starts to drop off. The stock in-tank fuel pump combo does not flow enough fuel to maintain sufficient pressure in the fuel rail.

The small in-tank fuel filter appears to become clogged in less than 30,000 miles restricting fuel flow resulting in insufficient flow/volume reaching the fuel rail. This can lead to a dangerous, lean fuel mixture. Until now, the only fix for this was to buy an entirely new “tank unit” from your local Toyota dealer. The fuel filter is not available separately and is only available as a complete tank unit that includes the plastic in-tank assembly with the fuel filter, fuel pump, and level float. This retails for around $575.  We have been seeing the very same problem in the Tundra tank unit and the filter becoming flow restrictive. The design is very similar to the one on the Tacoma.

URD has developed a way to replace the in-tank fuel pump with a high flow Walbro 255 LPH (and others) fuel pump and convert the small in-tank fuel filter with a large capacity external tank fuel filter that is easily replaced if needed. The new fuel filter can be replaced in minutes without having to go back into the fuel tank.

The URD 2005-2006 Tundra Fuel Pump/Filter Upgrade Kit fixes both problems, insufficient flow from the stock pump, and the problem of the stock fuel filter’s short service life before it becomes clogged and restricted.

URD gives you the option of what fuel pump you wish to run in your pump/filter conversion kit. The default pump the kit ships with is the Walbro 255 LPH High Pressure fuel pump.  We also have other pumps available.  You may pick from the AEM 320 LPH pump, AEM E85 32 LPH Pump, DeatschWerks 255, or 320 LPH pump, or the AeroMotive 340 LPH pump. If you wish to run E85 the DeatschWerks pumps are fully E85 compatible. The AEM and the AeroMotive pumps can be used with E85, but the manufacturer states that you should expect reduced pump life with the E85 fuel. The standard Walbro pump is not E85 compatible. For more info on the specific pump choices click on the pump name.

Year Make Model Engine
Year Make Model Engine
2005 - 2006 Toyota Tundra V6 4.0L 1GR-FE
2005 - 2006 Toyota Tundra V8 4.7L 2UZ-FE
Weight 3.00 lbs
Dimensions 12 × 12 × 4 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Scroll to Top